Drip Stand - Invacare Action 1 R User Manual

Invacare® Action 1 R
Unfolding the backbrace
1. Fold the backbrace B upwards.
2. Align the backbrace B with the push handle and push it
down on the hand screw A.
3. Firmly tighten the hand screw A and make sure that
the TWO hand screws A are properly tightened.
It is important to ensure that the backbrace is
correctly fitted and engaged at all times when the
chair is in use. It should not be left hanging loose
(see label C on the backbrace).

4.5 Drip stand

WARNING!
Risk of tipping / injury
– Max load on the drip stand: 5 kg (2 x 2,5 kg)
The rod of the drip stand must always be placed in
a vertical position, i.e in a 90 degree angle to the
ground, no matter the position of the wheelchair.
22
Height/Angle adjustment
1. Loosen the lever A.
2. Adjust the drip stand to the desired height or/and angle.
3. Firmly tighten the lever A.
1637828-B