Mounting The Attachment For Table Tray; Hemiplegic Armrest; Abduction Cushion; Trunk Support - Invacare Rea Azalea Series User Manual

Place the cushion for the table tray A on the table and place the
attachment straps B around the table.

5.4 Mounting the attachment for table tray

1.
B
A
Mount the table attachment A with the attachment part facing
outwards. The plain surface B of the attachment should be
placed upwards when using the table on the thin armrests.
2.
C
To fit the table attachment A to the wide armrest, turn the
attachment around, the patterned surface C should now be
facing upwards.

5.5 Hemiplegic armrest

B
A
1. Loosen the screw A.
Remove the original armrest B.
2.
Mount the hemiplegic armrest C in the armrest pole.
3.
Re-tighten the screw A.
4.
5. The hemiplegic armrest can be adjusted in angle. The resistance
can be increased/decreased by adjusting the screw A.
1488727-G
A
B
A
C
A
WARNING!
Risk of damage
Damage on the armrest
– Do not put pressure on the front of the armrest, as
this could cause damage on the armrest attachment.

5.6 Abduction cushion

1. The height adjustment and removal is operated by the handwheel
A.
2. The depth is adjusted in a forward or backward position. Loosen
handwheel A and turn.

5.7 Trunk support

5.7.1 Trunk support with fixed arm

The trunk supports can be adjusted in height, depth and sideways.
WARNING!
Risk of trapping
– Be careful not to trap your arm between trunk support
and armrest when changing the angle of the backrest.
C
A
Backrest plate
Tools: 5 mm Allen key
Height adjustment
1. You adjust the height by first loosening the screw / screws A.
Move the attachment B upwards or downwards.
2.
3. Re-tighten the screw / screws.
Sideways adjustment
Adjust the trunk supports sideways by loosening the knob C.
1.
2. Move the support sideways to the required position.
3. Re-tighten the knob C.
Accessories
A
A
B
B
Adjustable backrest
A
C
25