Armrest Adjustments; Armrest Height; Armrest Depth; Armrest Low - Invacare Rea Azalea Series User Manual

Rea® Azalea®

4.10 Armrest adjustments

4.10.1 Armrest height

B
A
1. Adjust the height of the armrests by turning the screw or the
handwheel B depending on which type of armrest you have
chosen.
2. Set the required height.
3. Re-tighten the screw / handwheel.
CAUTION!
Risk of trapping fingers
– Be careful not to trap your fingers between the arm
pad and the side support when you adjust the armrest
height.
The armrests have an auto-lock to prevent involuntary
movement or detachment. Press the button A on the
armrest to release before removing or adjusting the armrest.

4.10.2 Armrest depth

A
1. Loosen the screw or the handwheel A, depending on which type
of armrest you have chosen
2. Set the pad in the required position.
3. Re-tighten the screw / handwheel.
Risk of poor adjustment
– There must not be any pressure on the armrest while
adjusting the screw.

4.10.3 Armrest low

For Azalea and Azalea Max, we are also offering a lower armrest.
An experienced therapist must evaluate for which users
this low armrest is suitable, especially if used in the lowest
position.
18
CAUTION!
Risk of pinching
– Be careful when mounting the armrest.
For adjustments see section: 4.10.1 Armrest height, page 18 and
4.10.2 Armrest depth, page 18

4.11 Legrests

For users with longer legs, the legrest attachment can be
mounted in high position. Contact your Invacare dealer for
further information.

4.11.1 Angle adjustable legrest

Angle adjustable legrests support the legs and reduces pressure. The
legrests must always be fitted with calf pads, foot plates and heel
straps. It is important to adjust the height and angle of the legrests to
obtain a good seating position.
Adjusting the legrest height
1. Loosen screw A with an allen key.
Tools: 5 mm allen key
2. Adjust the legrest to a suitable height and the screw is caught by
one of the recesses on the legrest tube.
3. Re-tighten the screw.
Angle adjustment
WARNING!
Risk of damage
Damage on the mechanism
– Do not place anything heavy, or let children sit on the
legrest. It may cause damage to the mechanism.
– Do not put any pressure on the legrest while the angle
is being adjusted. The lever must be fully opened.
A
1488727-G