Si041137
5. Removal of Electrical Box
Procedure
Step
1
The figure shows the
connections of the wire
harnesses.
2
Remove the screw of
the wire retainer.
Remove the 4 screws
3
of the terminal board
and disconnect the
connecting wires.
Disconnect the
4
connector for the fan
motor [S1].
Removal Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Electrical box
[S1]
Removal of Electrical Box
Points
Preparation
Remove the front grille
according to the "Removal of
Front Grille".
(R13496)
Wire
retainer
(R13497)
Terminal
board
Connecting
wire
(R16968)
(R13499)
11