Displaying The Amount Of Media Remaining - Roland Soljet EJ-640 User Manual

Default Setting
[EMPTY MODE]: STOP

Displaying the Amount of Media Remaining

You can display how much of the media in use is left. By setting the amount of media currently remaining at
the start, the amount remaining will be constantly displayed on the screen until it reaches zero.
Procedure

Press .

MENU
SHEET REMAIN

SHEET REMAIN
SET LENGTH

SET LENGTH
0.0m 25.0m

W1200mm Ｌ25.0m
This display is
updated.
SETUP SHEET
ROLL Ｌ 25.0m
Description
If you cancel the setup such as by removing the media or raising the loading lever, the amount remaining at
that time flashes on the screen. Because the amount of media remaining is not updated automatically when
you change the media, redo the setting whenever you change the media. You can also set the machine to
display this menu automatically whenever you change the media. See the next section, "Making Sure to Verify
the Setting for the Amount Remaining Every Time the Media Is Changed."
Note: The remaining amount that is displayed is only an estimate, and its accuracy is not guaranteed.
Press to display the screen shown on the left.
Press , then
Press .
Press or
media remaining.
Press to confirm your entry.
Press , then
screen.
If setup has not been performed,
the set value flashes.
Output Operation Management
.
to set the current amount of
to go back to the original
5
109