What To Do If The Print-Head Carriage Does Not Operate - Roland SJ-645EX User Manual

7-1 What to Do If...

What to Do If the Print-head Carriage Does Not Operate

During operation, if for some reason the print-head carriage does not return to the standby position, then following the
procedure, cap the print heads, and contact the your authorized Roland DG Corp. dealer or service center.
If the print-head carriage is allowed to stand for a prolonged period with the print heads uncapped (that is with the print-
head carriage over the platen), the heads may become clogged or even damaged.
Capping the Print Heads
Make sure the main power is switched off, then
1
open the cover on the right side of the machine.
Open the front cover and move the print-head
2
carriage to the standby position by hand.
Insert the oval end of the pipe included with the
3
machine into the hole in the bottom of the ma-
chine, then rotate the pipe.
The cap unit rises.
Align the guides at the two ends of the cap unit
4
with the guides at the two ends of the print-
head carriage.
Turn the pipe more bring the cap unit close to
the print-head carriage.
Chapter 7: What to Do If...
102
Print-head carriage
Guides
Standby position
Guides
Cap unit
Pipe