Using The Magnetic Card Reader - VeriFone Carbon 8 Installation Manual

S
ETUP

Using the Magnetic Card Reader

CAUTION
Using the
Magnetic Card
Reader
To conduct a credit or
debit card transaction
28
C 8 I
ARBON NSTALLATION
3
Remove the card only when the application indicates the transaction is
complete.
Figure 17 Inserting a Smart Card
Leave the smart card in the card reader until the transaction is complete. Wait for
the prompt on the Consumer Display before removing the card.
Premature card removal will invalidate the transaction.
The Carbon 8 terminal supports credit or debit card transactions. If customers'
cards do not have an EMV chip or are not Smart Card compliant, use the
magnetic card reader to perform payment transactions.
1
Position the card with the magnetic stripe oriented downward, facing the
reader.
2
To ensure a proper read of the magnetic stripe, swipe the card smoothly
through the reader in one direction (from left to the right), as shown in Figure
18.
Figure 18 Using the Magnetic Card Reader
3
Check the screen for confirmation of a successful transaction.
G
UIDE