Using The Smart Card Reader - VeriFone Carbon 8 Installation Manual

Using the Smart
Card Reader
To conduct a smart
card transaction
5
Place the Stand on a stable platform and mount the Carbon 8 unit on the
stand.
Figure 16 Mounting Carbon 8 on Stand
6
If the Carbon 8 unit does not automatically power up, press the power button
on the Merchant Tablet (see
If the terminal comes pre-loaded with an application, this starts after the initial
Verifone copyright screen, and usually displays its own copyright screen.
7
Log in using your merchant account on the Merchant Tablet.
The Carbon 8 terminal supports Smart Card transactions. The smart card
transaction procedure may vary from one application to another.
Verify the procedure with your application provider before performing a smart card
transaction.
1
Position a smart card with the contacts facing upward (see Figure 17).
2
Insert the smart card into the smart card reader slot in a smooth, continuous
motion until it seats firmly.
Figure 2).
C

Using the Smart Card Reader

8 I G
ARBON NSTALLATION UIDE
S
ETUP
27