Clean The Air Suction Filter - Genie GTH-4013 sx Service Manual

May 2008
A-8

CLEAN THE AIR SUCTION FILTER

Clean the engine air filter every 10 working hours:
- Stop the engine and engage the parking brake.
- Lift the engine carter.
- Unlock the four clamps A.
- Remove the cap B.
- Extract the external filtering cartridge C.
- Clean the inside of the filter.
- Knock out the filtering cartridge using a wooden board
to eliminate the dust.
- Dry clean the cartridge (max. pressure 6 bar).
- Check for cracks in the filtering element.
- Refit the clean cartridge, or a new one, correctly,
appling some grease on the gaskets.
- Refit the plug B.
WARNING
As soon as the warning lamp on the cab dashboard
switches on, replace the filtering element.
WARNING
Do not wash the cartridge using water or other kind
of solvents.
Document 57.4403.4200
GTH-4013 SX GTH-4017 SX
Section 4 - Maintenance Procedures
A
C
A
C
Courtesy of Crane.Market
TABLE A
B
B
9