Cylinder Disassembly Boom Extension Cylinder Gth 4017 Sx; Courtesy Of Crane.market - Genie GTH-4013 sx Service Manual

Section 7 - Repair Procedures
006
TABLE
Procedure: Cylinder disassembly
Boom extension cylinder GTH 4017 SX
7 Loosen and remove the screw fixing the cylinder
pin (bottom side) using two 17 mm wrenches.
8 Extract out and knock the pin using a plug of
soft material (aluminium, copper, wood, etc.)
9 Pull out the cylinder from the boom section and
sling it with the textile bridles connected to the
bridge crane
22
7
8
GTH-4013 SX GTH-4017 SX
May 2008
006
Table:
GTH-4013 SX
GTH-4017 SX
Document 57.4403.4200

Courtesy of Crane.Market