Advertisement
Navigating the Standby Screen
Once the ShareLink Pro 1000 is connected and powered on, the standby screen appears on the display:
1
2
ShareLink Pro 1000 Standby Screen
Figure 4.
IP Address A and IP Address B — Use this IP address to identify and access the ShareLink Pro 1000 during
1
connection and to download the ShareLink Pro client software.
Hostname — Use this hostname to identify and access the ShareLink Pro 1000 during connection.
2
Login code — Use this code to connect to the ShareLink Pro 1000 using the software. This code can be
3
customized or disabled (see the ShareLink Pro 1000 User Guide for instructions).
Operation Using a Computer
Connecting a Computer to the ShareLink Pro 1000
A computer can be connected to the ShareLink Pro 1000 wirelessly through an external wireless access point (WAP), or wired
through a network device. See the instructions below for your preferred connection method.
Connecting through an External WAP
Ensure that the external WAP and the ShareLink Pro 1000 are wired
1.
to the same network.
Ensure that the ShareLink Pro 1000 is powered on and that wireless
2.
network capability is enabled on your computer.
Open the wireless networks on your computer as shown at right, and
3.
connect to the external WAP.
Connecting through a Network Hub, Switch, or Router
Ensure that your computer is connected to the network through a hub, switch, or router.
1.
Connect the LAN port of the ShareLink Pro 1000 to the network device using an RJ-45 cable.
2.
Downloading the ShareLink Pro Software
To download the ShareLink Pro 1000 Software:
Connect your computer to the ShareLink Pro 1000 device, either through an external WAP or through a physical network
1.
connection. The computer and the ShareLink Pro 1000 must be on the same network.
Open a web browser and enter the ShareLink Pro IP address (see figure 4,
2.
appears (see figure 5 on the next page).
3
) in the browser. The ShareLink landing page
1
3
Advertisement
