Using The Standby Screen - Extron electronics ShareLink Pro 1100 User Manual

F

Using the Standby Screen

Once the ShareLink Pro 1100 is connected and powered on, the standby screen appears
on the display:
Figure 6.
1
2
3
4
NOTES:
USB ports (see figure 5
Miracast adapter to either of these ports. This adapter enables anyone to share content
from a Windows 10 device without installing any software (see
Using the WFA 100 Miracast Adapter
2 2
1 1
Standby Screen
Hostname — Use this hostname to identify and access the ShareLink Pro 1100 during
connection.
IP Address A and IP Address B — Use this IP address to identify and access the
ShareLink Pro 1100 during connection and to download the ShareLink Pro client
software.
Login code — Use this code to connect to the ShareLink Pro 1100 using the software.
This code can be customized or disabled via the Product Configuration Software (PCS).
Time — The time format can be adjusted via the Product Configuration Software (PCS).
• The standby screen background can be changed using PCS. For best results,
make sure the desired background image matches the display output resolution.
• The status bar at the bottom of the standby screen (showing the IP addresses,
hostname, and login code) is overlaid over the background image. Ensure that this
portion of the background image does not contain important information as it will
be covered by the status bar.
on the previous page) — Connect the Extron WFA 100 Wi-Fi
on page 20).
3 3
ShareLink Pro 1100 • Installation
Mirroring a Screen
4 4
9