Using the Standby Screen
Once the ShareLink Pro 1000 is connected and powered on, the standby screen appears
on the display:
2
Figure 6.
1
2
3
NOTE:
1
Standby Screen
IP Address A and IP Address B — Use this IP address to identify and access the
ShareLink Pro 1000 during connection and to download the ShareLink Pro client
software.
Hostname — Use this hostname to identify and access the ShareLink Pro 1000 during
connection.
Login code — Use this code to connect to the ShareLink Pro 1000 using the software.
This code can be customized or disabled via the Product Configuration Software (PCS).
•
The standby screen background can be changed using PCS. For best results,
make sure the desired background image matches the display output resolution.
•
The status bar at the bottom of the standby screen (showing the IP addresses,
hostname, and login code) is overlaid over the background image. Ensure that this
portion of the background image does not contain important information as it will
be covered by the status bar.
3
ShareLink Pro 1000 • Installation
9