Advertisement
ShareLink 200 N • Setup Guide (Continued)
Using the Standby Screen
Once the ShareLink 200 N is connected and powered on, the default standby screen appears on the display:
ShareLink 200 N Standby Screen
Figure 3.
NOTE:
See the ShareLink 200 N User Guide for instructions on the following items.
1
Standby screen — Provides instructions for starting a presentation. The background image of this screen can be
customized.
2
Calibration tool icon (
calibrate a touchscreen for accuracy, if needed.
3
Screen Resize tool icon (
the screen presented on the display.
4
Whiteboard icon (
screen using a mouse or touchscreen.
5
USB Player icon (
files, and documents directly from the connected USB flash drive.
6
IP Address — Use this IP address to identify and access the ShareLink during connection.
7
Receiver — Use this receiver hostname to identify and access the ShareLink during connection through the ShareLink
software. This name can be customized.
8
Code — Use this code to access the ShareLink through the software (see
ShareLink 200 N
on the next page). This code can be customized or disabled (see the ShareLink 200 N User Guide for
instructions).
2
)— Double‑click to open the Calibration tool (for touchscreens only). This feature allows you to
)— Double‑click to use the screen resize tool. This feature allows you to change the size of
) — Click to use the display as a whiteboard. This feature allows the presenter to draw on a blank
)— Click to access the USB Player. This feature allows the presenter to access photos, videos, audio
Running the Software and Connecting to the
Advertisement
