Setting Up The Standby Screen - Extron electronics ShareLink 200 N User Manual

Setting Up the Standby Screen

Once the ShareLink 200 N is connected and powered on, the default standby screen
(see figure 4) appears on the display.
Figure 4.
1
2
3
4
5
6
7
8
Standby Screen
Instructional screen — Provides instructions for starting a presentation. The
background image of the instructional screen can be customized (see
page 29).
Calibration tool icon (
touchscreens only). This feature allows you to calibrate a touchscreen for accuracy, if
needed (see
Using the Calibration Tool
Screen Resize tool icon (
feature allows you to change the size of the screen presented on the display (see
the Screen Resize Tool
Whiteboard icon ( )— Click to use the display as a whiteboard. This feature allows
the presenter to draw on a blank screen using a mouse or touchscreen (see
Whiteboard Feature on page 9).
USB Player icon ( )— Click to access the USB Player. This feature allows the
presenter to access photos, videos, audio files, and documents directly from the
connected USB flash drive (see
IP Address — Use this IP address to identify and access the ShareLink 200 N during
connection (see Setting up the ShareLink Software
Hostname — Use this Hostname to identify and access the ShareLink 200 N during
connection through the ShareLink software. This hostname can be customized in the
configuration pages (see Network
Code — Use this code to access the ShareLink 200 N device through the software (see
Connecting a Computer to the ShareLink 200 N
customized or disabled (see
)— Double-click to open the Calibration tool (for
on the next page).
)— Double-click to use the screen resize tool. This
on page 8).
Using the USB Player
Setup, on page 27).
1
Device Setup on page 26).
ShareLink 200 N • Installation
OSD Setup
Using
Using the
on page 10).
on page 12).
on page 11). The code can be
on
6