Setting Up The Standby Screen - Extron electronics ShareLink 250 W User Manual

Setting Up the Standby Screen

Once the ShareLink 250 W is connected and powered on, the default standby screen
(figure 4) appears on the display.
Figure 4.
1
2
3
4
5
6
7
8
9
Standby Screen
Instructional screen — Provides instructions for starting a presentation. The
background image of the instructional screen can be customized (see
page 47).
Calibration tool icon (
touchscreens only). This feature allows you to calibrate a touchscreen for accuracy, if
needed (see
Using the Calibration Tool
Screen Resize tool icon (
feature allows you to change the size of the screen presented on the display (see
the Screen Resize Tool
Whiteboard icon ( )— Double-click to use the display as a whiteboard. This feature
allows the presenter to draw on a blank screen using a mouse or touchscreen (see
Using the Whiteboard Feature
USB Player icon ( )— Double-click to access the USB Player. This feature allows
the presenter to access photos, videos, audio files, and documents directly from the
connected USB flash drive (see
IP Address — Use this IP address to identify and access the ShareLink 250 W during
connection (see Setting up the ShareLink 250 W Software
Hostname — Use this Hostname to identify and access the ShareLink 250 W during
connection through the ShareLink software. This hostname can be customized in the
configuration pages (see Network
WiFi — Use this Wi-Fi name (SSID) to identify and access the ShareLink 250 W during
connection.
Code — Use this code to access the ShareLink 250 W device through the software
(see Connecting to the ShareLink 250 W Receiver
be customized or disabled (see
)— Double-click to open the Calibration tool (for
on the next page).
)— Double-click to use the screen resize tool. This
on page 8).
on page 9).
Using the USB Player
Setup, on page 42).
1
Device Setup on page 41).
ShareLink 250 W • Installation
OSD Setup on
Using
on page 10).
on page 12).
on page 14). The code can
6