Caliper Brake Pad Removal - SRAM eTap AXS Service Manual

C a l i p e r B r a k e P a d R e m o v a l
Remove the caliper from the frame, then remove the mounting bracket
1
and the hardware from the caliper. Set them aside in the order that they
were removed.
Remove the E-clip from the pad retention bolt, then remove the pad
2
retention bolt from the caliper.
Remove the brake pads from the caliper.
3
Brake pads must be replaced if the total thickness of the backing
plate and pad friction material is less than 3 mm.
NOTI CE
Digital caliper
2.5 mm

Caliper Brake Pad Removal

10