Caliper Brake Pad Removal - SRAM HydroR Service Manual

C a l i p e r B r a k e P a d R e m o v a l
1 Remove the caliper mounting hardware from the caliper, then set them
aside in the order that they were removed.
Flat mount: Leave the mounting bracket installed.
2 Remove the E-clip from the pad retention bolt.
2.5 mm
Remove the pad retention bolt from the caliper.
Needle nose pliers
3
Remove the brake pads.
NOTI CE
Brake pads must be replaced if the total thickness of the backing plate
and pad friction material is less than 3 mm.
Digital caliper
9

Caliper Brake Pad Removal