SRAM eTap AXS Service Manual page 19

Loosen and remove the compression nut and hose from the
5
valve body.
Loosen and remove the banjo bolt and the hose from the caliper.
6
Fluid will drip. Place an oil pan and/or shop towel under the caliper.
Remove the hose from the frame, according to your frame
7
manufacturer's instructions.
To remove the hose from internally routed frames, first cut the hose
near the compression fitting and remove the compression nut from the
hose.
NOTI CE
Flare nut wrench: 8 mm
T25
Open end wrench: 10 mm
19
Hose Removal