SRAM eTap AXS Service Manual page 29

Fold the hood cover forward. Install the second cover screw into the
7
auxiliary connector cover and gently tighten. Install SRAM eTap AXS
Blips into the auxiliary ports, or leave the seal plugs in place. Fold the
hood cover down.
Do not overtighten the screws. Overtightening the screws can
damage the hood assembly.
Do not use SRAMAXS shifters without Blip or Clic wires or seal plugs
installed. Moisture will damage the electronic components.
Your eTap AXS system must be paired before riding. Consult the Quick Start Guide Road eTap AXS Systems or the eTap AXS Systems User Manual for
pairing information at www.sram.com/service.
NOTI CE
T6
Electronic Subassembly Installation
29