Settings - Siemens SINEMA Remote Connect Operating Instructions Manual

4.6.4.2

Settings

On this page, you specify whether an e-mail is forwarded directly to the recipient or via an
SMTP relay server. You can also specify that the transfer of the e-mail takes place via an
encrypted connection.
Note
Sending via an SMTP relay server
To send the e-mail it is recommended that you use an SMTP relay server. If you use the
"Direct" transmission method, it is possible that the e-mail will be classified as not being
secure. The e-mail is then blocked and does not arrive.
Calling the Web page
In the navigation, select "System > SMS & E-mail > Settings".
Making settings for the SMTP client
Make the following settings in the "Settings" tab. Then click the "Save" button:
Box
Method of delivery
Maximum life in the
queue(s)
Sender
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
Meaning
Direct: The e-mail is forwarded directly to the SMTP server.
Via relay host: The e-mail is forwarded via an SMTP relay server to the recip-
ient. Make the additional settings listed in the following table.
Maximum time in seconds that the sender waits for a reply from the mail
server. When the time elapses, the transfer of the e-mail is aborted.
The E-mail address specified as the sender when transferring to the mail
server.
With the transmission method relay host, the e-mail address of the user ac-
count of the SMTP relay server is specified.
Configuring with Web Based Management
4.6 System
55