Enabling The E-Mail Address - Siemens SINEMA Remote Connect Operating Instructions Manual

Appendix B
B.1

Enabling the e-mail address

To receive the e-mail, with some network providers the e-mail address for the recipient of the
SMS message first needs to be enabled.
To enable the e-mail address, you normally send a special activation text to an abbreviated
number of your network provider. You will find several examples in the following table
"Activation and deactivation SMS".
You will receive a reply SMS with the e-mail address that is made up of the phone number
and the SMS gateway name of your network provider, for example:
0123412345678@providersms.com
Note
Check with your network provider whether or not it is necessary to send activation and
deactivation SMS messages. Your network provider will inform you of the texts and short
number.
Table B- 1
SMS gateway name smsmail.eplus.de
Enabling
Send SMS with text
to short number
Deactivating
Send SMS with text
to short number
See also
SMS (Page 53)
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
Activation and deactivation SMS (examples)
E-Plus
Text: START
Short number:
7676245
Text: STOP
Short number:
7676245
O Germany T-Mobile
2
o2online.de t-mobile-sms.de
Text: OPEN Text: OPEN
Short number: Short number:
6245 8000
Text: STOP Text: CLOSE
Short number: Short number:
6245 8000
B
Vodafone
vodafone-sms.de
Text: OPEN
Short number:
3400
Text: CLOSE
Short number:
3400
115