Overview Of Functions - Siemens SINEMA Remote Connect Operating Instructions Manual

Application and properties

1.2 Overview of functions

1.2 Overview of functions
Configuring the SINEMA Remote Connect server
The SINEMA RC Server can be configured via a Web Based Management (WBM).
Configuration of the SINEMA RC Server
In the WBM, you can use the following functions:
● Basic settings of the system
– Settings of the system and address parameters
– Language of the WBM
● Specifying users, groups and their rights
– Creation of users and devices including password assignment
– Creation and assignment of roles and rights
– Assignment of participant groups
● Configuration of connections
– Creation of communication relations between the participant groups
Commissioning/configuration of end devices
● You can create partial configurations globally for the end devices. This includes, for
example, configuration of NAT etc.
● Via the server, configuration information can be loaded on the end device.
Management of the server
● Changing settings of the system or participants
● Activating / deactivating connections between participants
Connection management
● Display of all connections available online and offline
● Connection configuration with creation of certificates
● Establishment and termination of connections
● Sending a wake-up SMS message to a device, for example to establish a secure
connection
12
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04