Create New Device - Siemens SINEMA Remote Connect Operating Instructions Manual

Configuring with Web Based Management
4.7 Remote connections
4.7.1.2

Create new device

Procedure
1. Click the "Create" button on the page of the device list.
2. Configure device setting
– Specify the following for the device.
– If required, enter additional device information and click the "Continue" button..
68
Box
Name of the device
Type of connection
SMS gateway provider
GSM number
Meaning
Enter a name.
The name must meet the following conditions:
It must be unique
•
it must start with a letter.
•
The following characters are permitted: a-z, A-Z,0-9 and _
•
"conn" cannot be used as a name.
•
1. Permanent: The VPN connection exists permanently:
2. Digital input: The VPN connection is established as soon as a
signal is applied to the "digital input".
3. Wake-up SMS: An alarm SMS message is sent to the device.
4. Digital input & Wake-up SMS
Can only be selected with the type of connection "Wake-up SMS"
or "Digital input & Wake-up SMS".
Select the SMS gateway provider. You configure the gateway pro-
vider in "System > SMS & e-mail"
For SCALANCE M-800 with SIM card:
Call number of the end device to which the wake-up SMS is sent.
Operating Instructions, 11/2017, C79000-G8976-C383-04
SINEMA Remote Connect - Server