Installing Sinema Rc Server - Siemens SINEMA Remote Connect Operating Instructions Manual

Installation and commissioning

3.2 Installing SINEMA RC Server

3.2 Installing SINEMA RC Server
Note
Keyboard layout during installation
During installation the keyboard layout "English (USA, International)" is set.
Note
To install SINEMA RC V1.3 Server, note the following:
• No system installed: Perform a new installation.
• SINEMA RC Server V1.2 pre-installed: Perform an update using the DVD for SINEMA RC
Server, see section "System update V1.2 > V1.3".
• SINEMA RC Server V1.0 or V1.1 pre-installed: First, update the version of SINEMA RC
Server to V1.2 from the "System update (Page 59)" WBM page and to version 1.3 using
the DVD. The update must be performed in the correct order: V1.0 > V1.1 > V1.2 > V1.3
Requirement
● In the startup order, the CD/DVD is set as the first boot medium.
● The hardware requirements are met.
26
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04