Upkeep And Maintenance; Backing Up And Restoring The System Configuration - Siemens SINEMA Remote Connect Operating Instructions Manual

Upkeep and maintenance

5.1

Backing up and restoring the system configuration

In the backup copy, the current system settings of the SINEMA RC Server are backed up,
e.g. configured devices, users.
Note
Settings that are not taken
The following settings are not backed up:
• Network settings
• Logfile messages
With the backup copy within a SINEMA RC version, you can restore the system settings of
the server or transfer them to a different server. A backup copy created on a SINEMA RC
version e.g. 1.2 cannot be read into a system with SINEMA RC version V1.3.
Configuring settings
Requirement:
● The user has been assigned the right "Edit system parameters".
Procedure
1. In the navigation panel "System > Backup & restore" select the "Settings" tab.
Enter the number of permitted backup copies.
An entry between 10 and 30 is permitted. When the maximum number is reached, the
oldest backup copy is overwritten.
2. If the system should be backed up at regular intervals, specify the interval and the time
for the backup.
3. Enter a "coding key".
The coding key must be at least 8 characters long and contain special characters, upper
and lowercase characters as well as numbers, refer to the section "Permitted characters
(Page 21)".
To the backup copy successfuly
4. Confirm the coding key.
5. Click the "Save" button.
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
5
107