Activating/Deactivating Base Station Number Display On Handset; Selecting The Best Station - Gigaset 2010 Operating Instructions Manual

14.8.98
Operation at more than one base station

Activating/deactivating base station number display on handset

Selecting the best station

Setting the preferred station
54
Kap17.fm5
You can program your handset to display the base
station with which the unit has radio contact.
3 6
B
Start the setting procedure. The current setting is
displayed:
36 1 = activated, 36 0 = deactivated.
1
B
Activate the base station number display.
or
0
B
Deactivate the base station number display (factory
setting).
When the display is activated, the number of the base
station is displayed continuously:
:
-1-
f
Normally, radio contact is automatically reestablished if
you move your handset from one base station radio area
to another. If problems occur, you can select the best sta-
tion. This is the station to which your handset can set up
the best radio connection.
We recommend that you define a preferred base station
if the handset is located in an overlap area between two
or more base station radio areas. This means you no long-
er need to change stations frequently.
There are two ways of setting the preferred station:
you can specify a base station at which the handset
should operate permanently ("fixed"). This prevents
automatic change to other base stations,
or
you specify a station at which the handset should "pre-
ferably" operate.
In this case, the handset searches for the preferred stati-
on. A connection is only set up to another station (the
best station) if the preferred station is not found (within 30
s).
Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
(Example: handset is linked
N
to base station number 1)