Maintenance Notes; Connecting The Telephone Socket - Gigaset 2010 Operating Instructions Manual

18.11.98
Notes on operation
Mounting the carrying clip onto the handset

Maintenance notes

Connecting the telephone socket

8
Kap03.fm5 Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619
If required, you can mount the carrying clip supplied with
the handset, e.g. if you wish to carry the handset in your
pocket.
Hold the handset with the keypad facing the palm of your
hand. You will see two small holes on the sides, level with
the display. Place the clip in one hole and then insert it into
the opposite hole until it clicks into place.
Simply wipe the handset and base station with a damp
cloth or an antistatic wipe.
Never use a dry cloth as this causes static dis-
charge.
Only use a Siemens telephone connecting cable. Cables
by other manufacturers may have a different pin assign-
ment.
The telephone cable socket is connected on the under-
side of the base station as follows:
3
2
1
Free
4 1
Free
2
5
a
3
b
6 4
Free
5
Free
6