Base Station Settings; Switching The Base Station Ringer Off And Setting The Ringer Volume - Gigaset 2010 Operating Instructions Manual

14.8.98

Base station settings

Base station settings

Switching the base station ringer off and setting the ringer volume

B
32
KAP09.FM5
You can program your Gigaset 2010 to suit your own indi-
vidual requirements. The settings are made from a regis-
tered handset.
It is possible to define whether the ringers should be sig-
naled on the base station or only on the handset. You can
set the ringer volume for the ringer on the base station.
There are seven volume levels available:
Level 0
Level 1 ... Level 6 =
The factory default is level 6 (loud).
# * 5
Start setting procedure. The ringer setting is sounded.
The set volume is indicated on the display:
n 5 6
:
P f
B
o Press the digit for the desired volume (1 to 6) or 0 to
switch the ringer off and store setting.
Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
= Switch off base station ringer.
Calls will only be signaled on the
handset.
Ringer volume low ... loud
It is also possible to set the ringer volume on the
handset ( page 34).
(Example: ringer volume 6
N
is set)
b