Technical Data - Gigaset 2010 Operating Instructions Manual

18.11.98

Technical data

Number of channels:
Radio frequency range:
Base station power supply:
Base station power consumption:
Handset operating times
(with fully charged battery):
In standby mode with NiCd
When the telephone is in use with
with NiMH, 1100 mAh
with NiMH, 1300 mAh
Charging time in base station:
Permitted ambient conditions
Signal key function:
Base station dimensions:
Handset dimensions:
Kap03.fm5
Standard: DECT = Digital Enhanced Cordless Telecommunications
GAP = Generic Access Profile (standard adhered to
120 duplex channels
1880 MHz to 1900 MHz
Duplex method: Time-division multiplexing, 10 ms frame length
Channel grid: 1728 kHz
Bit rate: 1152 kbit/s
Modulation: GFSK
Voice coding: 32 kbit/s
Transmitted power: 10 mW, average output per channel
Range: up to 300 m outdoors,
up to 50 m in buildings
220/230V (AC adapter)
In standby mode and when the telephone is in use ap-
prox. 3 W, during charging approx. 5 W
up to 70 hours
NiMH, 1100 mAh up to 110 hours
NiMH, 1300 mAh up to 130 hours
NiCd up to 7 hours
up to 11 hours
up to 13 hours
NiCd rechargeable batteries (approx. 4–5 hours)
NiMH rechargeable batteries, 1100 mAh (approx. 8–9
hours)
+5 °C to +45 °C
for operation: 20 % to 75 % relative humidity
Signaling method: DP (dial pulsing) / DTMF (dual tone multifrequency)
Flash
approx. 146 x 117 x 70 mm (L x W x H)
approx. 160 × 55 × 25 mm (L × W × H)
Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619
Notes on operation
by most manufacturers for DECT radio trans-
mission)
9