Signaling Method - Gigaset 2010 Operating Instructions Manual

14.8.98
Operating modes

Signaling method

Checking the signaling method of your telephone line
Setting the signaling method
033
O
037
O
16
KAP04.FM5
The PTT operates telephone connections with two differ-
ent signaling methods:
Dial pulsing (DP)
Dual-tone multifrequency signaling (DTMF)
The factory default setting for your Gigaset 2010 is
DTMF .
c
Press the off-hook key. You will hear the dial tone.
Press any digit, e.g. 2. If you still hear the same dial tone,
o
you must switch the signaling method to dial pulsing
(DP).
#1
B
Start the setting procedure.
Enter the four-digit base code (factory default: "0000")
o
( page 19).
B
Set to dial pulsing (DP).
or
B
Set to DTMF/Flash (factory default).
Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619