14.8.98
Operating modes
Exchange codes
Entering the exchange code
18
KAP04.FM5
For through connection to the public telephone network
you must set:
the exchange code
the pause length after the exchange code (if a pause
is necessary after entry of the exchange code)
If the telephone system is connected as a subsystem to
a main system, you must set the:
the exchange code
the pause length after the exchange code
The exchange code has one to three characters and can
comprise the digits
keys.
# 0
B
Start the setting procedure.
Enter the four-digit base code (factory default: "0000")
o
(
page 19).
O
Select the exchange code.
Enter the exchange code. If more than one exchange
o
code is available, you can enter the next exchange code
by pressing
B
Store setting.
Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
For the pause length to be entered after the ex-
change code, please consult the documentation
about your telephone system.
0
9
to
and the
O
.
:
#
R
,
and