Table of Contents
Advertisement
Charge status of the batteries
The charge status is indicated by the top right display icon. After the initial charg-
ing procedure a complete charging to full capacity takes at least 18 hours.
e U
◆
(flat to full)
e
◆
flashes: batteries almost flat
U
◆
flashes: charging
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incom-
ing calls, and so that the alarm can be used.
¢
¢
¢
MENU
Settings
~
¢
¢
Date:
~
¢
Time:
a
(press to return to idle status)
Please note
When entering the time and date, you can move the position of an entry to the
left or right by pressing the control button up or down.
Display in idle status
Once the phone is registered and the time set, the idle
display is shown as in this example.
If more than one handset is registered, the internal
number of the handset is shown in the upper left cor-
ner.
Activating/deactivating the handset
Press and hold the
If you place a deactivated handset in the base station or charging cradle, it will
automatically activate.
Your phone is now ready for use.
If you have any questions about using your phone, please read the tips on trouble-
shooting ("Questions and answers"
team page 13.
¢
¢
OK
Date/Time
(enter the day, month and year in 6-digit format)
(enter hours and minutes in 4-digit format)
a
key to activate or deactivate the handset.
7
¢
OK
¢
page 12) or contact our Customer Care
¢
¢
OK
OK
U
11.12.
11:56
INT
MENU
Advertisement
Table of Contents
