Changing The System Code, Changing The Pin - Gigaset 2010 Operating Instructions Manual

14.8.98
Modify the pause length according to the excharge code
0 2 4
O
0 2 5
O
0 2 0
O
0 2 1
O
Deleting the exchange code
2 5 3
O

Changing the system code, changing the PIN

KAP04.FM5
Possible pause lengths are:
1 second
2 seconds
3 seconds (factory default)
6 seconds
# 1
B
Start the setting procedure.
Enter the four-digit base code (factory default: "0000")
o
( page 19).
B
Select pause length of 1 second.
or
B
Select pause length of 2 seconds.
or
B
Select pause length of 3 seconds (factory default).
or
B
Select pause length of 6 seconds.
# 1
B
Start the setting procedure.
Enter the four-digit base code (factory default: "0000")
o
( page 19).
B
Delete exchange code.
To protect your personal settings, Gigaset 2010 has two
code numbers, a four-digit system code and an eight-digit
handset PIN (personal identification number). The factory
defaults are as follows:
System code : "0000"
Handset PIN : "0000"
You need to know the system code in order to create ba-
sic settings or to lock the telephone for outgoing calls.
The system code can thus be described as the main code
for your Gigaset 2010 telephone.
The PIN primarily protects settings on your handset(s),
but it has no effect on the basic functions of the base sta-
tion. For security reasons, a new system code and a new
PIN should be entered.
If several handsets are operated (
system code is valid for each one.
Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Operating modes
page 51), the same
19