Base Station Settings; Restoring The Base Station To Factory Settings; Activating/Deactivating Repeater; Mode - Gigaset C450 IP User Manual

Base station settings

The base station settings are carried out
using a registered Gigaset C45 handset.
Changing the system PIN
You have to enter the system PIN when
registering a handset to the base station.
You can change the base station's 4-digit
default system PIN ("0000") to a 4-digit
PIN known only to yourself.
¢ ¢
Settings
§Menu§
~
Enter current system PIN and
press
§OK§
~
Enter your new system PIN
and press
For security reasons, " **** " is displayed
instead of the system PIN.
a
Press and hold (idle status).
Restoring the base station to
factory settings
When the settings are restored all hand-
sets are de-registered. The individual set-
tings are reset. Only the date and time are
retained.
¢ ¢
Settings
§Menu§
Press the display key to
§OK§
confirm.

Activating/deactivating repeater

mode

With a repeater you can increase the range
and reception strength of your base sta-
tion. You have to activate the repeater
mode for this. This will terminate any calls
being made via the base station at that
time.
¢
Base System PIN
.
.
§OK§
¢
Base Base Reset
Precondition: a repeater is registered.
¢ ¢
Settings
§Menu§
¢
Features Repeater Mode
Select and press
Setting up an emergency
number
Emergency numbers are automatically
dialled via the fixed network. You can set
up your own emergency number.
¢ ¢
Settings
§Menu§
¢
Features Additional Emergency No.
~
Enter the system PIN and press
.
§OK§
If an emergency number is already saved,
this will be displayed.
~
Enter emergency number and
press
§OK§

Set default connection

You can make settings according to
whether you want to make calls via VoIP or
fixed network by default.
¢ ¢
Settings
§Menu§
Type
/
IP fixed line
Select and press
When making calls:
¤
Briefly press the talk key c if you want
to make a call via this default connec-
tion.
¤
Press and hold the talk key c if you
want to make a call via the other con-
nection type.
Base station settings
¢
Base Additional
(‰ = on).
§OK§
¢
Base Additional
.
¢
Base Default Line
(‰ = on).
§OK§
37