Configuring Bridge Link; Figure 70 Menu 3.5 Wireless Lan Setup; Table 40 Menu 3.5.1 Wlan Mac Address Filter - ZyXEL Communications ZyAIR G-3000 User Manual

ZyAIR G-3000 User's Guide
The following table describes the fields in this menu.

Table 40 Menu 3.5.1 WLAN MAC Address Filter

FIELD DESCRIPTION
Active To enable MAC address filtering, press [SPACE BAR] to select Yes and press [ENTER].
Filter Action Define the filter action for the list of MAC addresses in the MAC address filter table.
To deny access to the ZyAIR, press [SPACE BAR] to select Deny Association and press
[ENTER]. MAC addresses not listed will be allowed to access the router.
The default action, Allowed Association, permits association with the ZyAIR. MAC
addresses not listed will be denied access to the router.
MAC Address Filter
1..32 Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers that are
allowed or denied access to the ZyAIR in these address fields.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to cancel" to
save your configuration or press [ESC] to cancel and go back to the previous screen.

13.3.2 Configuring Bridge Link

Follow the steps below to configure bridge link on your ZyAIR.
1 From the main menu, enter 3 to open Menu 3 – LAN Setup.
2 Enter 5 to display Menu 3.5 – Wireless LAN Setup.

Figure 70 Menu 3.5 Wireless LAN Setup

WLAN Adapter Index= WLAN 1
Operating Mode= Bridge / Repeater
ESSID= N/A
Hide ESSID= N/A
Channel ID= CH06 2437MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP Encryption= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Authen. Method= N/A
Press Space Bar to Toggle.
3 In the Operating Mode field, press [SPACE BAR] to select Bridge / Repeater or AP
+ Bridge and press [ENTER].
131
Menu 3.5 - Wireless LAN Setup
Press ENTER to Confirm or ESC to Cancel:
Edit MAC Address Filter= N/A
Edit Bridge Link Configuration= Yes
Preamble= Long
802.11 Mode= Mixed
Max. Frame Burst= 650
VLAN ID= 1
Breathing LED= Yes
Chapter 13 LAN Setup