Authentication Required: Wpa-Psk; Figure 38 Wireless Lan: 802.1X/Wpa For Wpa Protocol; Table 20 Wireless Lan: 802.1X/Wpa For Wpa Protocol - ZyXEL Communications ZyAIR G-3000 User Manual

ZyAIR G-3000 User's Guide

Figure 38 Wireless LAN: 802.1x/WPA for WPA Protocol

The following table describes the labels not previously discussed

Table 20 Wireless LAN: 802.1x/WPA for WPA Protocol

LABEL
Key Management
Protocol
WPA Mixed Mode
WPA Group Key
Update Timer
Authentication
Databases
Apply
Reset

6.18 Authentication Required: WPA-PSK

Select Authentication Required in the Wireless Port Control field and WPA-PSK in the
Key Management Protocol field to display the next screen.
91
DESCRIPTIONS
Choose WPA in this field.
The ZyAIR can operate in WPA Mixed Mode, which supports both clients running
WPA and clients running dynamic WEP key exchange with 802.1x in the same Wi-
Fi network.
Select Enable to activate WPA mixed mode. Otherwise, select Disable.
The WPA Group Key Update Timer is the rate at which the AP (if using WPA-
PSK key management) or RADIUS server (if using WPA key management) sends
a new group key out to all clients. The re-keying process is the WPA equivalent of
automatically changing the WEP key for an AP and all stations in a WLAN on a
periodic basis. Setting of the WPA Group Key Update Timer is also supported in
WPA-PSK mode. The ZyAIR default is 1800 seconds (30 minutes).
When you configure Key Management Protocol to WPA, the Authentication
Databases must be RADIUS Only. You can only use the Local User Database
Only with 802.1x Key Management Protocol.
Click Apply to save your changes back to the ZyAIR.
Click Reset to begin configuring this screen afresh.
Chapter 6 Wireless Security