Mac Filter - ZyXEL Communications ZyAIR G-3000 User Manual

Table 15 Wireless
LABEL
Apply
Reset

6.4 MAC Filter

The MAC filter screen allows you to configure the ZyAIR to give exclusive access to up to 32
devices (Allow Association) or exclude up to 32 devices from accessing the ZyAIR (Deny
Association). Every Ethernet device has a unique MAC (Media Access Control) address. The
MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for
example, 00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure
this screen.
The WLAN Adaptor drop down list box is only available when you have an external wireless
card inserted in the ZyAIR. No matter whether you select Built-in or Removable, the
configuration screens are the same for each interface.
To change your ZyAIR's MAC filter settings, click the WIRELESS link under ADVANCED
and then the MAC Filter tab. The screen appears as shown.
Chapter 6 Wireless Security
DESCRIPTION
Click Apply to save your changes back to the ZyAIR.
Click Reset to begin configuring this screen afresh.
ZyAIR G-3000 User's Guide
78