Figure 28 Roaming; Table 14 Roaming - ZyXEL Communications ZyAIR G-3000 User Manual

ZyAIR G-3000 User's Guide
To enable roaming on your ZyAIR, click the WIRELESS link under ADVANCED and then
the Roaming tab. The screen appears as shown.

Figure 28 Roaming

The following table describes the labels in this screen.

Table 14 Roaming

LABEL
Active
Port #
Apply
Reset
73
DESCRIPTION
Select Yes from the drop-down list box to enable roaming on the ZyAIR if you
have two or more ZyAIRs on the same subnet.
Note: All APs on the same subnet and the wireless stations must
have the same ESSID to allow roaming.
Enter the port number to communicate roaming information between access
points. The port number must be the same on all access points. The default is
3517. Make sure this port is not used by other services.
Click Apply to save your changes back to the ZyAIR.
Click Reset to begin configuring this screen afresh.
Chapter 5 Wireless Configuration and Roaming