Disassembling And Assembling Distributor - Skoda Octavia Workshop Manual

28
------------ 28-2 ------------
Ignition System
15 - Connector, 2-pin
♦ For knock sensor
16 - Spark plug, 25 Nm
♦ Type and electrode gap ⇒ page 28-3
17 - Spark plug connector
♦ 4...6 k
18 - Ignition cable
♦ Test for continuity
19 - Holder
Disassembling and assembling
distributor
1 - Distributor shaft
♦ With orifice plate for Hall sender
♦ Pull out after removing roll pin -8-
2 - O-ring
♦ Replace if damaged
3 - 3 Nm
4 - Plastic washer
5 - Shim(s)
6 - Hall sender (G40)
♦ Testing ⇒ page 28-5
7 - Distributor housing
8 - Roll pin
9 - Socket
♦ Before removing, mark position of
driver stud to shaft -1- (arrow)
OCTAVIA
Edition 11.98
S00.5109.51.20