Removing And Installing Air Flow Sensor - BMW 745i Repair Instructions

I
92
Unscrew nuts.
INSTALLATION: Replace seal.
1362 000 REMOVING AND INSTALLING AIR
FLOW SENSOR
Pull off multiple-pin plug (1).
Loosen hose clamp (2) and pun intake hose off of
air flow sensor.
INSTALLATION: Check intake hose and hose
clamp for correct fit.
Unscrew bolts.
INSTALLATION : Check gasket, replacing if ne-
cessary.
Mount ground w ire (3) again.
Tighten bolts to 8.8 .. . 9.8 Nm (6.4 to 7.1 ft. Ibs.).
INSTALLATION: Only use air flow sensors with
Bosch No. 0 280 203 012 for BMW 745 i cars.