System characteristics
● The result output of the optical reader takes place via the Ethernet interface.
● The optical reader can be triggered via either:
– Digital I/O
– TCP/IP
– The built-in auto-trigger function
● A PC/programming device is connected via Ethernet and a switch to allow adjustment of
the device.
4.5
System setup via the RS-232 interface
①
②
Figure 4-4
SIMATIC MV500
Operating Instructions, 06/2018, C79000-G8976-C494-01
Optical sensor or light barrier (for trigger signal)
Object with code
Example: System configuration via the RS232 interface
Network and system integration
4.5 System setup via the RS-232 interface
57