Appendix; Finding The Suitable Lens; A.1 Finding The Suitable Lens - Siemens SIMATIC MV540 H Operating Instructions Manual

Appendix

A.1

Finding the suitable lens

Use the component table below to determine which components you may need in addition to
the optical reader and lens, depending on the requirements of your reading environment.
Table A- 1 Component table
Requirements
Near-field
(7 ... 80 cm)
Far field
(0.5 ... 3 m)
The reader can also be operated with third-party external lamps/ring lights. In this case, the
lamp must be adjusted accordingly.
You can learn which lens is the right one for your requirements using the TIA Selection Tools
or the SIMATIC Ident Configuration Guide. You can find the tools under the following links:
● TIA Selection Tool (http://www.siemens.com/tia-selection-tool)
● SIMATIC Ident Configuration Guide
(https://support.industry.siemens.com/cs/ww/en/view/67384964)
SIMATIC MV500
Operating Instructions, 06/2018, C79000-G8976-C494-01
Possible Components
Built-in ring light red (Multi,
red)
Protective lens barrel
D65 metal/glass
Built-in ring light red (Multi,
red)
Ring light, external
(metal, infrared, clear)
Ring light, external
(metal, red, clear)
Protective lens barrel
D65 metal/glass
Article number Remark
6GF3540-8DA13
•
•
6GF3540-8AC12
6GF3540-8DA13 Required accessories for the operation
of the external ring lights:
6GF3400-0LT01-
•
7BA1
6GF3400-0LT01-8DA
•
1
6GF3540-8AC12
Compact variant
Very low wiring requirements
Ring light holder for MV500 ring
lights
Connecting cable for external ring
lights
A
219