Mounting Attachments For Built-In Ring Lights - Siemens SIMATIC MV540 H Operating Instructions Manual

Mounting

5.4 Mounting attachments for built-in ring lights

5.4 Mounting attachments for built-in ring lights
The built-in ring lights are delivered fully assembled with the corresponding attachments. The
attachments that are included depend on the following factors:
● Built-in ring light (Basic, Remote, Multi)
● LED color of the ring light
The following table gives you an overview of the various attachments and the included filters,
as well as the corresponding built-in ring lights.
Table 5- 1 Ring light attachments
Attachment
Attachment with polarization
filter
Anti-glare attachment
In addition, all built-in ring lights are supplied with the anti-glare attachment.
70
Suitable built-in ring lights
Built-in ring light red (Multi, red)
Built-in ring light red (Multi, red)
Attachment properties
This attachment is equipped with a polarization filter.
It was specially developed for flexible use in the near
field and far field with white and red LEDs.
This attachment allows unimpeded light propagation
with large radiation angles.
The anti-glare attachment was developed for applica-
tions with lenses with focal length ≤ 16 mm that have
to illuminate a wide field. This attachment prevents
illumination reflections on the cover glass of the pro-
tective lens barrel.
Operating Instructions, 06/2018, C79000-G8976-C494-01
SIMATIC MV500