System Configuration With Cm And Auto-Trigger - Siemens SIMATIC MV540 H Operating Instructions Manual

4.7

System configuration with CM and auto-trigger

①
Figure 4-6
System characteristics
● Power supply and system integration are provided through a communication module or
over Ethernet.
● To trigger the reader, no light barrier or similar must be installed. The triggering is
performed in the optical reader itself, as soon as a readable code comes into the field of
view of the optical reader (auto-trigger).
● A PC/programming device is connected via Ethernet to allow adjustment of the device.
SIMATIC MV500
Operating Instructions, 06/2018, C79000-G8976-C494-01
Object with code
Example: System configuration of optical reader with auto-trigger function
Network and system integration
4.7 System configuration with CM and auto-trigger
59