Checking the network status
After starting up the system, check whether data link can be normally performed. Use the CC-Link IE TSN/CC-Link IE Field
diagnostics of the engineering tool to check the status.
1.
Connect the engineering tool to the CPU module on the master station.
2.
Start the CC-Link IE TSN/CC-Link IE Field diagnostics.
[Diagnostics] [CC-Link IE TSN/CC-Link IE Field Diagnostics]
If the following display appears, a data link is normal.
In this manual, "Authentication Class" is described as "CC-Link IE TSN Class".
If an error icon appears in "Network Status" area, use the CC-Link IE TSN/CC-Link IE Field diagnostics to identify the cause of
the error and take corrective actions. ( Page 169 Checking the Network Status)
3.2 Communication Example with CC-Link IE TSN Class A Remote Station
3 PROGRAMMING
141
3