Table of Contents
Advertisement
PVI 23TL, 28TL Installation and Operation Manual (Rev J)
3.3
Inverter Positioning and Mounting
The Inverter can be mounted vertically or with a 15°-90° horizontal angle, as shown in Figure 3.1a
and 31 b below.
The shade cover option must be purchased and installed for any installation angles of
75° or less.
WARNING: Do not install the inverter tilted forward, lying on its back, or upside
down as shown in Figure 3.1 c, d and e.
WARNING: Shade covers are required for inverters installed at angles 75° or less.
DOCR-070365-J
Figure 3.1a – Allowable Inverter Mounting
Page 15 of 66
Advertisement
Table of Contents
