PVI 23TL, 28TL Installation and Operation Manual (Rev J)
Figure 3.10 – Fasten the Main Housing and Wiring Box
onto the Bracket
Figure 3.11 – Attaching the Cover Board
Figure 3.12 – Installing an Anti-theft Padlock
DOCR-070365-J
9. Connect the main housing and
wiring box to the mounting bracket
using a #2 Philips screwdriver and six
M5*10 bolts (available in accessory
box).
Torque = 14in-lbs
10. The previously removed cover box
can be reattached to the left side of
the wiring box (available in accessory
box).
11. An anti-theft padlock can be
installed as shown in the image to the
left
(padlock
not
accessory box).
available
in
Page 20 of 66