PVI 23TL, 28TL Installation and Operation Manual (Rev J)
3.3.1 Wall Mounting
The minimum distances that should be met for wall mounting are shown in Figure 3.2 below.
For adequate cooling, there should be a minimum of ≥ 20 inches of space available between
two adjacently mounted inverters.
A minimum of 12 inches from the left side and 12 inches from the top are needed for
adequate access and cooling.
A distance of 24 inches from the bottom is recommended for the inverter's LCD to be at eye
level. If needed, this distance can be lowered to 10 inches.
12.0in
(305mm)
DOCR-070365-J
12.0in
(305mm)
24.0in
(610mm)
Figure 3.2 – Wall Mounting Clearance Requirements
20.0in
(508mm)
Page 16 of 66