Power Control For Pc Source - Sharp Aquos LC 37HV6U Operation Manual

Basic adjustment settings

Power control for PC source

Power control setting allows you to save energy.
MENU
RETURN
SOURCE
POWER
FAVORITE CH
A
POWER INPUT
Power management
When set, the power will automatically shut down.
1
Press MENU and the PC MENU screen
displays.
2
Press c/d to select "Power Control".
3
Press a/b to select "Power Management",
and then press SET/ENTER.
[ Power Control ... Power Management ]
PC MENU
Power Control
Power Management
4
Press a/b to select "Mode1" or "Mode2",
and then press SET/ENTER.
Selected item
• No power management
Off
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the PC and the signal
inputs again, the System stays off.
Mode1
• The System turns on again by pressing
POWER button on the Display or TV
POWER on the remote control unit. (See
page 21).
• If no signal inputs for 8 seconds, the power
shuts down.
Mode2
• When you start using the PC and the signal
inputs again, the System turns on.
40
TV/SAT/DVD DTV/DVD TOP
MENU MENU
DTV/SAT
GUIDE
SET/
ENTER
DTV/SAT
INFO
VCR REC
B C D
VOL VOL
RECEIVER
Setup
[Off]
Off
Mode1
Mode2
Description